viper 991 on a uk 97 escort

laserline was ok til it was MOT'd in the garage and they ripped it up. I was not happy because it did everything i wanted it to do, doors, windows etc. it was professional installed which is why i followed the same wires. i removed the laserline a few eeks ago. viper / python came from Ebay..was cheap as a basic TOAD alarm for £89

i liked the pager facilty , not bothered about the remote start so it was supposed to be a very very very simple case of connecting a few wires up.

It was down to the MOT people to repair it. Toad comes from the same factory as Viper, Hornet, Python etc. but it's vastly inferior. Fleabay? Good luck and no guarantee. When it goes on sale in the UK it will have a WHOLESALE price of about £200!

Unless it's the latest spec, the remote with the pager will last about 6 months. Already superseded about 2 years ago by the 5902/992.

garage were Cads got nowhere with them. was going to pay to get alarm installed until i read of some of the monkeys out there, so i thought i would give it a go. stuck a micorscan in my clio ez as anything so i thought this can only be a few hours to do.wrong. thanks again. will post back when i find the NEG wire and hopefully all working..until the window lock module arrives

Got to be the easiest window close going, as long as it's a DEI 529t or 530t. Comparing Microscan and Laserline POS is like saying a Proton is as good as a BMW!

window module is 530t radar sensor i remember the halfords 'sparkrite' alarms they were def proton v bmw will let u know how it goes

hi again. still no joy, cant find dome neg wire. had tester on most wires and cant get a thing that shows 12v then NEG when door shut. also how do i wire the relay for light flashing to work. i have everything ready to go but not 100% sure which wire to connect to which pin on relay. i do have a relay diagram but it looks wrong. THanks

also what should the light fuse be set to + or - in the the alarm brain housing. THanks

You need someone more experienced to test for you, again if you have to ask about polarity setting on the indicator output or relay when all you need are a pair of diodes then should you be attempting this?