I'm currently mapping out my install of a Viper 5092 using the Idatalink ADS-DLSL-HA in my 2006 TL. I'm going with the Wire to Wire method because from what I read the datalink cable is not very reliable and this is the best way.
I've mapped out most all my connections but I'm having trouble figuring out how to utilize the Lock / Unlock and the arm/ disarm connections between the Car, Idatalink & 5902.
I want to be able to use the comfort closure feature, so I know I need to go inside the door for this. Also I don't want the car to unlock before it remote starts. I've read about installs where they wanted to avoid going in the door so these feature were not part of there install.
Here is what I have below. Whatever I left out of the H2 connector I'm not using unless I need to (let me know). I also left out the H3 connector because I have no questions about that harness.
Please any help would be appreciate!! I'm ready to get out there and start ripping the car apart!
VIPER MODULE
H1-HARNESS
H1/1 -RED / White (-) 200mA channel 2 output -- IDATALINK Trunk (-) input RED / White
H1/2 -Red 12V Constant input –- Grey wire 520T
H1/3 -Brn(-) Siren out-- Siren
H1/4 – (not used)
H1/5 - Black ground -- connected with IDATALINK “ground black”
H1/6 - Violet --(NOT USED)
H1/7 - Blue (-) 2nd unlock output -- Blue wire 520T
H1/8 - Green (-) Door Trigger Input –- (NOT SURE ???????)
H1/9 - BLACK/ White (-) 200mA dome light -- (NOT USING)
H1/10 - WHITE/ Blue(-) activation input -- (NOT USING)
H1/11 - White (+) parking light output –- (RED / Black Connector J Body)
H1/12 - Orange ground when armed output-- (NOT USING)
H2- HARNESS
H2/1- Light GREEN/ Black (-) -- Factory alarm disarm (White-Inside Door)
H2/3- GREEN / WHITE (-) --Factory alarm rearm
H2/9- Violet/white TACH Input –-(Center Console Connector A Pin 15-20)
H2/10 Dark Blue- Status Output – (?????)
H2/16 - 2nd Status Defroster output –- Relay
H2/17 – Brown -Brake Shutdown Input –WHITE/ black Pedal connector
H2/18 - BLACK/ White- Neutral Safety Input – Ground Temporarily
Door Lock , 3 PIN
1. Blue Door Unlock (-) 500mA Unlock Output—(?????)
2. Empty
3. Green Door Lock (-) 500mA Lock Output- (?????)
IDATALINK MODULE
-Ground out when running Blue/White – (?????)
-Ground black - Connected to H1 ground and H3 Neutral Safety input and grounded at same location
-12V Red – Grey 520T
-LOCK/ARM INPUT (-) INPUT Grn/Blk – (????)
-UNLOCK INPUT (-) Blu/Blk – (????)
-TRUNK(-) INPUT RED / White -- RED / White H1/1 ON 5902
-DISARM(-) INPUT Brown –- (????)
-STARTER INPUT Blk/white –- ( VIOLET SAME AS H3/4)
-Door/Trunk Status (-) output Green -- (NEEDED???)
-Tach Output PURPLE / White – ( SAME AS Violet/White H2/9)
-Wht/Blk Security light input – ON DIAGRAM
-WHITE/ Red Security light output – ON DIAGRAM
-Yellow Hood (-) Output –- (NEEDED???)
-ORANGE / Black Key Data –- ON DIAGRAM
-Orange Door lock Data –- ON DIAGRAM
-Pink Ignition input –- ON DIAGRAM