starter kill

Home / the12volt's Install Bay / Car Security and Convenience / starter kill (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fireman4

Member - Posts: 14

Joined: October 17, 2011

Posted: October 23, 2011 at 9:31 AM / IP Logged

hey guys ok im looking into putting a starter kill in my girlfriends car its a 2003 ford focus and it has a compustar CM600-S remote starter in it. and i have a SONGLE realy thats N/O 40A and N/C 30A. wire colors are pin 87 yellow pin 87a red pin 85 is black pin 30 is blue and pin 86 is white. now how would i go by wiring that up? thanks

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 23, 2011 at 10:36 AM / IP Logged

Cut the grey/black starter wire, switch side to 87a, motor side to 30,

armed out (WA), black from C/star to 85 and white from C/star (ign +) to 86. 87 not used unless it's the starter output from the C/star. This is all explained on the install instructions.

Back to Top

fireman4

Member - Posts: 14

Joined: October 17, 2011

Posted: October 23, 2011 at 12:12 PM / IP Logged

So do I keep the white wire hooked up to the ign. Or do I cut it a put it to the relay also what about the starter wire coming from the compustar

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 23, 2011 at 2:03 PM / IP Logged

Don't you have an install guide? It's fully explained or there should be one in the Downloads/Manuals section on this site.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

starter kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.