the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bulldog deluxe 500


Post ReplyPost New Topic
< Prev Topic Next Topic >
vinny27 
Member - Posts: 3
Member spacespace
Joined: December 03, 2011
Location: Michigan, United States
Posted: December 04, 2011 at 7:45 AM / IP Logged  
I have a 2009 Ram pickup that I have put a Buuldog deluxe 500 remote starter and a xk09 bypass module in. I am almost positive all the wiring is correct. I did not install the hoodpin switch (Bulldog said that this was optional). The locks work, the parking lights work, but, the truck will not start. When I push the start button on the remote the ignition barrel clicks 3 times and thats it no starting. The diagnostic light code reads that it is not sensing the tach (which I did not hook up either. It said this was optional also) Does anyone have any suggestions? I have been working on this for about 5 days and getting very frustrated. I have talked to tech support at Bulldog several times and they are not very helpful.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 04, 2011 at 8:15 AM / IP Logged  
to fix your problem, run a tach wire. this shouldn't be optional.
and the hood pin is not optional either, its a safety to you cant remote start if the hood is open.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
vinny27 
Member - Posts: 3
Member spacespace
Joined: December 03, 2011
Location: Michigan, United States
Posted: December 04, 2011 at 9:03 AM / IP Logged  
Just asking. Do you know where the tach wire is on a 2009 Ram pickuP?
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: December 04, 2011 at 11:59 AM / IP Logged  

The best place is a F.I.  Here is the tach info from DEI :

Tachometer        NOT BROWN / white  (a/c)            any fuel injector

Page 30 of the install guide has the tach learn process.

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer