the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

autostart 1414 hf


Post ReplyPost New Topic
< Prev Topic Next Topic >
deuce1974 
Member - Posts: 2
Member spacespace
Joined: December 31, 2011
Location: Newfoundland, Canada
Posted: December 31, 2011 at 11:48 AM / IP Logged  
I have this remote starter and need to program a new transmitter, old one has only one button left working on it. I went through all the steps in the manual but I can't seem to get the module into program mode by using the flash pin or the PAB. I hold the flash pin down for the 4-5 seconds and let it come up, then down again for a sec and up, but lights only stay on for about 3 seconds, tried programming in this time frame with 2 people, but no luck. Any help would be greatly appreciated.
Thanks
lspker 
Silver - Posts: 503
Silver spacespace
Joined: November 23, 2003
Location: Canada
Posted: January 02, 2012 at 8:33 PM / IP Logged  
brain probably locked up...........disconnect and reconnect and try to program...   but first make sure your hood pin is grounding, sometimes on the second press it may not make good contact.
deuce1974 
Member - Posts: 2
Member spacespace
Joined: December 31, 2011
Location: Newfoundland, Canada
Posted: January 03, 2012 at 6:47 AM / IP Logged  
How do I disconnnect? Just pull the cords out of the back of it? I haven't much experience with these.
Thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer