the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

sub box construction


Post ReplyPost New Topic
< Prev Topic Next Topic >
my boom 
Member - Posts: 2
Member spacespace
Joined: January 04, 2012
Posted: January 04, 2012 at 8:27 PM / IP Logged  

Hi all,

         I am after some info about building a dual speaker sub box. All the info I can find is for one speaker not two! I have heard that with the two speakers in the one "Sealed" or "Ported/Vented" box sizeis reduced by 50%. Is this true??? Also, if i decide to build a ported/vented box, do i need two ports or just the one?? The speakers will be in the one chamber. Not individual chamers! 

The subs i will be using are Blaupunkt, velocity, vcs12

I have all the data for the subs from the manual but it dose not say anything about two speakers in the one box.

thanks for all your help. 

jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: January 05, 2012 at 9:24 AM / IP Logged  
More than likely the information from Blaupunkt is for each sub. So, if you make it twice as large as it would be for 1 sub, and add another identical port, it will be fine.
Or you could build 2 identical boxes ;)
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
my boom 
Member - Posts: 2
Member spacespace
Joined: January 04, 2012
Posted: January 07, 2012 at 6:41 AM / IP Logged  
Thanks jmelton86 for the info,
I was thinking that with just doubling the size with the extra port but was not to sure.
Does any one know about the box size being smaller with the secon speaker? (insted of just doubling the size) I think it has something to do with the different pressures in the box with the second speaker which allows it to be smaller??? Is this true or just crap???
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: January 07, 2012 at 10:34 AM / IP Logged  
It's not that simple.  You need to calculate the correct size for the performance you want.  Putting two speakers into one enclosure is not always just doubling the specs for one, and it NEVER involves doubling the specified port!  For a very rough idea of what you need, go HERE and enter the data from your woofer's spec sheet.
Support the12volt.com
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: January 07, 2012 at 9:32 PM / IP Logged  
You can half the size of the required enclosure by using two speakers, but overall performance will suffer. It is called an isobaric configuration. The key to making it work is one speaker has to be wired out of phase of the other. You can then build an enclosure half the size that would be required for one speaker. The drawback is you'll need twice as much power (you need to power both subs with identical power) and the output will roughly equal the output of one sub.
The important thing about ports is port volume. You can use one port as long as the one port has the same volume as what the two ports would provide.
Kevin Pierson
forbidden 
Platinum - Posts: 5,353
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: January 08, 2012 at 5:27 PM / IP Logged  

And to steal a saying from another person on another site...... minimum space = minimum bass.

Top Secret, I can tell you but then my wife will kill me.
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: January 08, 2012 at 7:42 PM / IP Logged  
KPierson wrote:
You can half the size of the required enclosure by using two speakers, but overall performance will suffer. It is called an isobaric configuration. The key to making it work is one speaker has to be wired out of phase of the other. You can then build an enclosure half the size that would be required for one speaker. The drawback is you'll need twice as much power (you need to power both subs with identical power) and the output will roughly equal the output of one sub.
I suppose it depends on your definition of "suffering".
1: Half the volume for the same extension, frequency response, and total system Q. Bonus.
2: DRAMATICALLY improved linearity, perhaps the greatest BENEFIT to an iso-loading. Bonus.
Those aren't detractions to me...
Certainly, there are detractions...
1: Expense. You have to buy twice the drivers...
2: ...and that's all I got...
Big fan of iso loads! sub box construction -- posted image.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: January 09, 2012 at 4:45 AM / IP Logged  
Sorry, that wasn't very clear. By "suffer" I meant you will not get the output of two subs in an isobaric configuration.
Kevin Pierson
xchrisx 
Copper - Posts: 197
Copper spacespace
Joined: August 19, 2008
Location: Pennsylvania, United States
Posted: January 12, 2012 at 2:38 PM / IP Logged  
Why not just build a box twice the size of what they recommend for one sub and add .75" to the length(provided you're using .75" MDF) then in the direct middle, put a divider the size of the your sides of the box so it acts like it is 2 separate boxes, but it looks like one box and will sound great too.
bp

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer