the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5 pin bosch style relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 09, 2012 at 12:58 AM / IP Logged  
Actually Peter, they aren't, some of the drawings have the terminals reversed for convenience of circuit layout, whereas when I do my little drawings and try to keep to the 85NEG, 86POS convention, they end up looking like maps of London's Underground!
As Messrs. Idiot and KP will confirm ISO convention makes 85 NEG and 86 POS. That's how the car manufacturers wire them and as you know VERY relevant if inbuilt diodes or pre-dioded in the wiring looms as some car manufacturers loom them.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer