the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 Toyota FJ Cruiser Remote Start Pictorial


Post ReplyPost New Topic
< Prev Topic Next Topic >
effardee 
Member - Posts: 1
Member spacespace
Joined: November 09, 2014
Posted: November 09, 2014 at 1:49 PM / IP Logged  
This is a great thread, thanks for the information.
I am working on an install of an Audiovox APS-57C on my 2007 FJ (auto). It has two IGN output wires on the remote unit harness.
Will I still need to use a relay for the ignition wires on the FJ harness or will this work as it is?
Secondly, can anyone confirm whether or not I will need to use a security system bypass on this vehicle? My key is stamped with an "L"--however it is just a normal looking key with a separate FOB so I think its just a standard key. I have three keys total so if I need to hide one in the car someplace I can? Need some clarification there if possible. THanks!!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, October 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer