the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 subaru impreza flcan


Post ReplyPost New Topic
< Prev Topic Next Topic >
mazda 6t9 
Member - Posts: 33
Member spacespace
Joined: December 30, 2005
Location: United States
Posted: January 20, 2012 at 9:52 PM / IP Logged  

doing a remote start on a 2008 impreza tomorrow. Just wanting to make sure the FLCAN unit will work with the right firmware, i guess its TB-SUB would be the one i want??

I only need the transponder bypass I can hardwire the rest and hope the factory security system dosent give problems.

kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 20, 2012 at 10:30 PM / IP Logged  
Yes.  It is a multi step process requiring KLON access.  Here is a link to the install guide.   http://www.idatalink.com/common/file/get-install-guide/id/7971    Follow the Type 2 wiring instructions. 
Soldering is fun!
mazda 6t9 
Member - Posts: 33
Member spacespace
Joined: December 30, 2005
Location: United States
Posted: January 21, 2012 at 8:54 AM / IP Logged  
You know what download number that would be? Can I flash the box without it being hooked to the car. I just got the USB interface.
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 21, 2012 at 9:57 AM / IP Logged  

Here is a link to the Flashlink WEB site :  http://www.flashlogic.com/solutions-for-vehicle/5341

Click on  KLON in the top center of the screen and LogIn.  It is a multi-step process and, yes, the first firmware download can be done before installation.

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer