2003 honda civic 4dr, viper 211hv

Car: 2003 Honda Civic 4dr Sedan Item: Viper 211hv Keyless Entry To start, I'm a college student with more time than money (and little of both), and decided to install a Viper keyless entry system myself. The install instructions are probably legible to someone of the trade, but I can't make too much sense of them. Just want to read up on install before actually attempting it. Any help on how to actually wire the system to the car would be great. I have the wiring guide for the car (found on bulldog security site) and Viper's wiring guide for the system. I also found this wiring guide from someone doing a similar install on a '92 Chev 3/4 ton Ext Cab. https://www.the12volt.com/installbay/uploads/211.bmp Haven't tested the unlock/lock wires to ensure 12v when activating the unlock/lock switch, will do that tomorrow. Am I on the right track??

 Here is the 2003 Civic info fropm DEI :

Power Lock     WHITE/ Blue (-)    gray plug above driver kick   

Power Unlock             WHITE/ Green (-)          gray plug above driver kickParking Lights(+)       RED / Black (+)   back of the fuseboxHorn Trigger      Orange (-)        steering column 12volts             White (+)          ignition harness Ignition            BLACK / YELLOW (+)          ignition harness  

H1/1       +12V constant  White

H1/2       N.U.     H1/3       N.U.H1/4       N.UH1/5       WHITE/ BlueH1/6       N.UH1/7       Chassis GroundH1/8       WHITE/ GreenH1/9       Chassis GroundH1/10      RED / Black   ***Set to (+) - Factory Default  H1/11      Chassis GroundH1/12      Orange     H1/13      N.U.H1/14      N.U.H1/15      BLACK / YELLOW    H1/16      N.U.H1/17      N.U.H1/18      N.U.

Soldering is fun!

Wiring went off without a hitch. Getting back behind that fuse box was a huge pain. Didn't want to remove the seat. I left the horn disconnected, its somewhat of a nuisance to me. Thanks for your guidance!