2003 ford expedition, viper 5704

found it guys!  the keypad code is written right on the vsm module!

Now the black n yellow wire right on the vsm module as suggested for door triggers still triggers front driver door...rest are not detected....

You can try the BLACK/ lt. blue in the driver's kick panel. This is a (+) door trigger and MAY be the dome supervision wire. If it is the dome supervision wire then there may be a slight delay on the door trigger zone arming of the alarm. Basically it will not arm that zone until the domelight goes out. This is usually only a matter of seconds so it should never cause any issues.Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

quick solution is use the domelight, change the setting of the unit to ignore domelights for 5 seconds or 30 seconds. will prevent the "door open" on the remote when arming.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert