clifford gsx560

Hi all does anyone have any info on these they are made by gizmo I believe In particular looking for install and user guides for this module Can anyone help Cheers Andrew

Not a chance,some company in Hayes now imports some of the product. You could try Armour to see if they are keeping any tech info or there have been recent posts about Callguard on this site, look up the archives.

Not a chance,some company in Hayes now imports some of the product. You could try Armour to see if they are keeping any tech info or there have been recent posts about Callguard on this site, look up the archives.

I had the Callguard unit installed on my last car i now have a new car and 2 off these units but they didn't come with a guide the guy is looking into it so thought i would ask on here as there is always a good knowledge from members on here. cheers

OK so i now have the manual for fitting there are some definite marked improvements software wise over the call-guard unit. with the call-guard it was fitted via the horn output of the Clifford alarm, this went through a relay to take the negative trigger and covert it to a positive trigger which the unit will accept however it does state this will work with a warn-away alarm system well a Clifford does have the warn away feature so with a relay will it still work ? my thoughts are not as the warn away will be outputting a short pulse in negative form which may not be long enough for the relay to accept the signal and the call guard to respond (down side of mechanical switching i guess) so it there a better way to wire it in ?

ok so the BROWN / black wire on the Gismo unit, is also a multiplexed input so could this be piggy backed onto the Clifford siren output to allow the warn away feature etc ? anyone