avital 4103 on a 2000 honda passport

Thanks man. Got it all cleaned up, wires hidden & programmed. Now I'm headed to have a Margarita with my wife to celebrate lol. Took just under 5 hours but I had already found all wires except the tach wire. Thanks again for your assistance!

Ok so I haz one more question..I wanna add the DEI 530T window module to this. Would the ORANGE accessory output wire from the 4-pin satellite harness be a viable output to use? I don't wanna use the RED / WHITE channel 2 output because I'd have to hold the button down for 1.5 seconds longer for vent/rolldown.

Yes to orange but AFAIK RED / white is the only other wire you can use, a basic unit and no other aux outputs, the red white will still work if you are careful with the button.

BTW, tach is a blue wire on a 2 way plug attached to the wiring loom adjacent to the rear of one of the front suspension struts, or the same colour at the rear of the instrument panel.

Cool so orange it is. Just wanna make sure I use an aux wire controlled by the auxiliary (trunk) button on the remote that gives me access to the 1-push vent/3 second rolldown options built in to the 530T. I have no use for the trunk release option as the Passport has a manual back glass push button on the outside of the back door. I wasn't sure if that orange wire from the satellite harness was controlled by the auxiliary button on the remote. Thanks again bro!

Oh I have the tach wire connected. Its actually a BLACK/ red wire in the drivers kp black 22 pin harness. I did the tach learning & she's working perfectly. But thanks anyway lol..

As far as I can tell use the orange at H1/5 to trigger up (close) and you might use the satellite relay orange for vent and down but you will have to test, I'm not sure because the installation guide doesn't explain the satellite relay functions.

Ok cool. I'll use the orange satellite wire at first & test the functions before I finalize the installation. If not then I'll suck it up & use the RED / white trunk auxiliary output & waste another 1.5 seconds of my life each time I let the windows down lol. Thanks again man. Really appreciate your help!

Ok so I got it hooked up & its working, but I'm having one issue...to get the windows to go up I have to press lock, unlock, then lock again. It wont let the windows up on the first push of the button. Btw, I did have to use the RED / white trunk aux out wire. The orange satellite wire did nothing. Any ideas on the up issue? Defective unit maybe?

So it seems the doors have to be unlocked before the windows will roll up on the lock action. If I leave the windows down & lock the doors I have to unlock then lock for the windows to go up. Guess that's a product of the option of pushing the aux button then locking the doors which is a function that leaves the windows down. No biggie. So that install took 7 hours vs the 5 hours on the r/s. But all is well. They work. The r/s still works (didn't fry anything lol). I'm satisfied. Not bad for a rookie eh? Lol