Viper 732T on 02 Ford Focus?

Home / the12volt's Install Bay / Car Security and Convenience / Viper 732T on 02 Ford Focus? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hwilliams59

Member - Posts: 11

Joined: April 10, 2003

Location: United States

Posted: May 04, 2003 at 11:59 PM / IP Logged

Went to install my Viper Alarm today, and ran into a few problems. The first is the dome light supervision, could not find the right connection at all. And will this be a problem since the Focus has a short delay after the car is turned off. And I still need to install my power door locks and hook those up too. Let me list the wires from the alarm wireing harness that I still have to connect:

WHITE/ blue (-) 200 mA Channel 3 Validity Output

BLACK/ white (-) 200 mA Domelight Supervision Output

Blue (-) Multiplex Trigger Input, Zone 4

Violet (+) Door Trigger Input, Zone 3

RED / white (-) 200 mA Channel 2 Validity Output

Any help with these wires.

Thanks HWilliams

hwilliams59

Member - Posts: 11

Joined: April 10, 2003

Location: United States

Posted: May 05, 2003 at 12:03 AM / IP Logged

Sorry meant Hornet 732TAlarm

HWilliams

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: May 05, 2003 at 7:48 AM / IP Logged

Well, here's a link to the install guide, but I'm sure you have that already: Click here

I don't have a wiring diagram for you car, but I'm sure someone else can post a link to one.

For the WHITE/ Blue (Channel 3) and for the RED / White (Channel 2) wires, these are for extras that you might add to your alarm. For example, trunk release, window modules...things like that.

For the BLACK/ White (Domelight Supervision) wire, you'll be connecting this to a relay as is described at the bottom of page 9 in the manual. You'll see on the right side of that diagram (with the relay), that depending on if your door locks are (+) or (-), you'll hook up the relay differently. I'm not sure what your door locks are, though, but this is just a heads-up.

For the Blue (Multiplex Trigger) wire, you can use this for your trunk (if you want). I have my trunk wire hooked up to this trigger, so if the trunk is opened, the alarm will sound.

The Violet wire will or won't be used, again...depending on what type of door locks you have. I guess we have to figure that out first. :-)

Any other questions, please write back. Sorry this was so general, but we need to find what type of door locks you have....or a wiring diagram.

hwilliams59

Member - Posts: 11

Joined: April 10, 2003

Location: United States

Posted: May 06, 2003 at 8:34 PM / IP Logged

Thanks for the reply, you answered all of the qustions I had. It had a ford alarm wiring harness on it already, but some connections are different. As for the door locks it has none right now, I'll be installing them this weekend. As for the BLACK/ White (Domelight Supervision) I believe the factory Ford harness had this wire connect to the door trigger....(Just remembered that) but they did not use a relay for this, do I have to. It is the delay that the light has that is throwing me off. But for the Blue (Multiplex Trigger) wire I think I have to hook it up too the light that comes on in the hatch when it is open.

Thanks again

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 06, 2003 at 10:53 PM / IP Logged

Make: Ford

Model: Focus

Year: 2002

This Database Was Last Updated On: 10/7/02

Index #: 7221

Alarm

Constant 12 volts RED IGNITION SWITCH HARNESS

Ignition 12 volts GREEN/ YELLOW IGNITION SWITCH HARNESS

Starter GRAY/BLACK IGNITION SWITCH HARNESS

Dome Light BLACK/ BLUE (-) AT CENTRAL JUNCTION BLOCK *

Trunk Pin Switch BLACK/ BLUE (-) AT LIGHT OR SWITCH IN TRUNK **

Parking Lamp ORANGE / GRAY (+) AT CENTRAL JUNCTION BLOCK *

Power Lock BLACK/ RED AT G.E.M ANTITHEFT MODULE

Power Unlock BLACK / YELLOW HIGH IN PASS KICK

* Central Junction Block Located Behind Driver Dash. ** Wire Listed Is With OEM Anti-Theft. With OEM Anti-Theft Wire Color Is BLACK/ ORANGE (-) At Anti-Theft Module High In Passenger Kick Panel. #201- See Negaitve Pulse Door Lock Diagram

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 732T on 02 Ford Focus?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.