alarm 1996 nissan maxima

Hi Howie,

So I was not able to program it to have driver priority unlock but thats not a big deal.  I did program it do a double pulse on unlock and a single pulse on lock, so I only have to press each button once.  Thanks so much for your help.  I couldn't have done it without you.

Now on to part two :)

I also purchased a Crimestopper CS-5601 4-windows control module.  I think I'll be ok connecting the wires and all from the control module to to the window switches (in drivers door).  I would like to know which diagram to use (I have a one-click window down button) and which wire on the ULTRA START box to wire it to?  Please let me know if I will need to use a relay (i hope not).

Thanks,

Scott

  

You will have to use the motor wires in each door. I think you will find that Maxis use a data pulse from the driver door to each window, I owned an 88 and a 93 and they were both like that. Go to each pair of motor wires and it's wired as a type "A".

I may be incorrect, but didn't that generation Maxima have the ability to roll the windows up(at least) from the drivers door lock cylinder? Try to turn your key to either lock or unlock and then hold it there. wait a few seconds and see if the windows roll up(lock) or down(unlock). If they do, then you will most likely not need a window rollup module. Again, I could be wrong, but its worth checking. It only takes a few seconds...

Hi Flobee, Thanks for the suggestion. I can control each window from the driver panel but they do not roll up or down automatically. Howie, are you suggesting I use the first diagram or the second one? Thanks, Scott

Diagram 1.

Thanks. I searched this site and google for the window wire diagram but I couldn't find it. Does anyone happen to know? Thanks Scott

Please disregard my previous message. I found a wore diagram. However it shows all the wires as having the same color in each door blue/red and blue/black. In the drivers panel I only see one set of those wires. I would like to wire it so the front goes up and down. Can I do it from the drivers door panel or do I need to go to the passenger front door as well? Thanks Scott

Are you reading what I wrote a few posts ago as in having to go to each door?

Ok. So Im almost done with all the wiring forbthe windows. I checked each wire before and after the connections and there's continuity between the motor and brain, and switch and brain. There's an 8 plug connection that's on the brain as well and I'm not sure how to connect it. This is separate from the 9 pin plug I used to wire the windows. I have attached it below. Any help would be great. Oh I'm doing the front windows up and down. Thanks Scott

here are the pics.  I've already connected th 9 pin.  Not sure what to do with the 8 pin and those two loops: