programming cm6200s,

Home / the12volt's Install Bay / Car Security and Convenience / programming cm6200s, (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

amigoxp

Member - Posts: 10

Joined: August 17, 2004

Location: Canada

Posted: August 05, 2012 at 9:56 AM / IP Logged

Hi,

I need help for entering in menu 4 of CM6200S. I n manual, it's written to push

Lock + Key/Start for 2.5

seconds then Lock + Key/

Start for 2.5 seconds

Does i must push on Lock and Key/start at the same time for 2.5 secondes or i must push and relase Lock follow by Key/Start for 2.5 seconds. The combination is not clear in my head. I need your help.

thanks

Back to Top

kreg357

Platinum - Posts: 7,786

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: August 05, 2012 at 10:43 AM / IP Logged

Press ( simultaneously ) buttons 1 and 4 at the same time and hold for 2.5 seconds, release, then press ( simultaneously ) buttons 1 and 4 again for 2.5 seconds. That will get you into Menu 4 ( but an OP-500 will make life much easier and get you into the Special Options menus... ).

Button 1 = Lock Button 4 = Key/Start

Soldering is fun!

Back to Top

amigoxp

Member - Posts: 10

Joined: August 17, 2004

Location: Canada

Posted: August 05, 2012 at 6:11 PM / IP Logged

Thanks kreg

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming cm6200s,

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.