viper alarm lights won't flash

Home / the12volt's Install Bay / Car Security and Convenience / viper alarm lights won't flash (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

20silverado06

Member - Posts: 26

Joined: September 01, 2012

Location: Texas, United States

Posted: September 03, 2012 at 8:12 PM / IP Logged

I just got my alarm/remote start installed and working. It's the 5704 and xpresskit db-all. The parking lights work when I arm and disarm but when the alarm sets of they don't. How do I get them to. And I have it hooked up with d2d

Back to Top

auto enhancers

Copper - Posts: 203

Joined: April 09, 2012

Location: Indiana, United States

Posted: September 04, 2012 at 11:14 AM / IP Logged

More info please. Year make model of vehicle. How and where are the lights hooked up. Have you checked programming of the alarm.

Back to Top

Search for other posts by auto enhancers

20silverado06

Member - Posts: 26

Joined: September 01, 2012

Location: Texas, United States

Posted: September 04, 2012 at 12:02 PM / IP Logged

06 silverado. Nothing's wired to truck beside r/s and data wire. It's all d2d like I mentioned in first post

Back to Top

01ws6/tamu

Member - Posts: 44

Joined: December 28, 2010

Location: Texas, United States

Posted: September 05, 2012 at 6:24 PM / IP Logged

Your best bet would be to set the park lamp output to negative pulse and hard wire it at the BCM.

Tie it into connector 2 gray shell terminal B2 white wire at the BCM.

This is the park lamp relay control output from the BCM

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper alarm lights won't flash

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.