Security Lght

Home / the12volt's Install Bay / Car Security and Convenience / Security Lght (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Malibu2882

Member - Posts: 13

Joined: April 21, 2003

Location: United States

Posted: May 07, 2003 at 1:06 AM / IP Logged

I would like for the dash's "security" light to flash when the alarm is armed. I'm sure I'll have to tap in to the wire the goes in to the cluster but I'm not sure. Has anyone done this before? I already have an LEDon the dash.Any pointers? thanks!

Dave

99 chevrolet malibu

Dave

Back to Top

special137

Member - Posts: 4

Joined: May 06, 2003

Location: United States

Posted: May 07, 2003 at 6:52 AM / IP Logged

You would need to ditch the LED or tap the wires to it and relay it to the security lamp. You'll have to find out which wire from the instrument cluster feeds the security light and tap this. Use a 1 amp diode to isolate the feed from the relay to the to the security light. That should do it for you!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Security Lght

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.