06 f250 factory b/u camera to 4400bh

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 06 f250 factory b/u camera to 4400bh (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

robd007

Member - Posts: 25

Joined: October 29, 2009

Location: Texas, United States

Posted: November 15, 2012 at 9:47 PM / IP Logged

Is there a way to connect the factory backup camera to a pioneer avh-p4400bh?

Thanks in advance

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 15, 2012 at 11:07 PM / IP Logged

There will be either 3 of 4 wires coming from the factory camera. One will be 12 volts when the vehicle is placed in reverse. Another will be video signal. There will be either 1 or 2 grounds. If 2, they are common and it does not matter which you use for power ground or video ground. Cut this cable and splice accordingly.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 f250 factory b/u camera to 4400bh

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.