00 jeep grand cherokee out of range error

Home / the12volt's Install Bay / Car Security and Convenience / 00 jeep grand cherokee out of range error (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

greeky510

Member - Posts: 21

Joined: October 19, 2012

Location: Connecticut, United States

Posted: November 16, 2012 at 12:50 PM / IP Logged

I installed a Viper 5704 on my 00 Jeep Grand Cherokee. Everything works fine except when i remote start the car the remote will not work. It gives out of range error on all functions. This is the 3rd one i install and its the first time this happens. Any ideas? Thank you much.

Back to Top

greeky510

Member - Posts: 21

Joined: October 19, 2012

Location: Connecticut, United States

Posted: November 16, 2012 at 1:01 PM / IP Logged

I used the DB-ALL bypass module in the D2D configuration

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: November 16, 2012 at 9:09 PM / IP Logged

Most common cause is a poor ground, check and make sure that you getting good metal to metal contact.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

00 jeep grand cherokee out of range error

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.