2001 tacoma viper 5704

Home / the12volt's Install Bay / Car Security and Convenience / 2001 tacoma viper 5704 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 17, 2012 at 5:34 PM / IP Logged

No confusion, note the word in each of the above, INPUT.

By-pass?

Leave the key in the ignition (turned off) then try.

If not check your outputs, starter ign 1 and 2 etc.

See that they correspond to the wires Kregg mentioned.

Also check the voltage between the your unit ground and each fuse.

lowlyfe

Member - Posts: 8

Joined: November 16, 2012

Location: Utah, United States

Posted: November 17, 2012 at 6:55 PM / IP Logged

It works!! It was a ground. Thanks for everyone's help here it was much appreciated. I just have to button everything

up under the dash tomorrow and install my hood pin and brake switch..(which looks like its going to be a pain to

get to...

Thanks again!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 17, 2012 at 11:07 PM / IP Logged

Pick up the brake switch wire in one of the floor looms, trace it forward from the colour at the bulb, probably GREEN / WHITE.

lowlyfe

Member - Posts: 8

Joined: November 16, 2012

Location: Utah, United States

Posted: November 18, 2012 at 8:44 PM / IP Logged

Any ideas to why my hood pin doesnt set my alarm off? It gives me the report on the fob that its open

if i set the alarm with it open. However if i set the alarm with it closed..then let go of the pin it doesnt go

off?

Thanks

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 tacoma viper 5704

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.