prestige 997c

Home / the12volt's Install Bay / Car Security and Convenience / prestige 997c (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

hotimportnight9

Member - Posts: 19

Joined: July 29, 2005

Location: United States

Posted: November 21, 2012 at 9:05 AM / IP Logged

racerjames76 wrote:

The avox units use a common ground for all internal relays and can cause some strange things when not all wires are connected properly (or left unconnected in this case). Best bet is to hook everything up, and once it is powered up correctly the issues will stop. prestige 997c - Page 2 - Last Post -- posted image.

prestige 997c - Page 2 - Last Post -- posted image.

Make sense

One thing I found strange that I haven't seen on dei or compustar is that orange wire starter inhibiter what's that wire usually use for n do I need it for the remote starter?

Jinx

Search for other posts by hotimportnight9

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 21, 2012 at 9:18 AM / IP Logged

Its a GWA. Goes to ground when armed funny you never noticed it, it's also orange on DEI and nearly every other regular brand except Comp where it's blue again marked as ground when armed pin 1 plug CN2.

Come to think of it I can't think of any alarm or alarm/RS sold in either North America or here in Europe that didn't have a GWA wire.

hotimportnight9

Member - Posts: 19

Joined: July 29, 2005

Location: United States

Posted: November 21, 2012 at 9:13 PM / IP Logged

how do you connect ol-mdb-all to the prestige 997c ?

Jinx

krushmoto

Member - Posts: 22

Joined: June 13, 2002

Location: United States

Posted: December 01, 2012 at 2:51 PM / IP Logged

Just figured out the key sense has to be "hot" for the RS to work on '12 Santa Fe.

Which way do you guys recommend I energize the key sense (+) by relay or tap one of the input lines?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 01, 2012 at 2:55 PM / IP Logged

Use a relay and please, diode across 86 and 85, band to the hot side; also inline diode on your GWR wire before the relay, use 2 x 1N4004s.

krushmoto

Member - Posts: 22

Joined: June 13, 2002

Location: United States

Posted: December 01, 2012 at 3:02 PM / IP Logged

Thanks again Howie.

Always there to help me out of a jam!

krushmoto

Member - Posts: 22

Joined: June 13, 2002

Location: United States

Posted: December 16, 2012 at 12:38 PM / IP Logged

Got everything hooked up now for some reason it won't start when i use the RS. Both Ign wres are hooked up, starter, accessory and key in sense. Verified all the wires and the starter wire puts out 12V when its starting but the starter doesn't kick over. OEM RS works fine so....any ideas?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

prestige 997c

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.