the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 charger rs issue


Post ReplyPost New Topic
< Prev Topic Next Topic >
pitoaudiovisual 
Copper - Posts: 388
Copper spacespace
Joined: April 25, 2005
Location: Pennsylvania, United States
Posted: December 14, 2012 at 5:57 PM / IP Logged  
I installed a Viper 771XV into a 2010 Dodge Charger using a Fortin bypass and everything is working like lock and unlock, lights, truck etc but when i try to remote start the car the door locks will lock,unlock, lock and try to start but wont stay on for more than 30 seconds. I try to go tachless to see but its not working. Any help would be appreciated and thanks in advance
Confidence is the key to any project!!
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: December 14, 2012 at 6:23 PM / IP Logged  

A few questions:

Are you using the THAR-CHR4 T-Harness?

Did you cut the RED / White Ignition wire and wire as shown for the 2010 models?  ( Or the Yellow wire in the T-Harness)

Did you Enable Option 12 on the EVO-ALL?

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer