I’m in need of some pointers and help installing a Viper 5704 into a 2002 F350 Diesel. I’d like to see if someone can verify what I've done so far and if it’s correct. Also needing additional help with the other connections.
In addition to the standard Viper 5704 alarm I’m also adding a 506T glass breakage sensor, 507M tilt sensor, 508D Proximity radar motion sensor, 530T Window control module.
Keep in mind my vehicle details:
2002 F350 Diesel Superduty XLT four door crew cab
Four wheel drive
No key phobe, just a regular key with separate remote push button OEM security.
No rear window defrost, just a regular full length rear window.
So far I’ve done:
-Main Harness, 6-pin connector
-H1/1: Red, (+)12VDC Constant Input. [found constant 12VDC and connected]
-H1/2:Black, (-) Chassis ground. [Connected to chassis ground]
-H1/3:Brown, (+) Siren Output. [Connected to red wire in siren]
-H1/4:WHITE/ Brown, Parking light isolation wire-pin 87a of onboard relay [not used]
-H1/5:White, Parking light output. [connected to parking light + wire, verified and works]
-H1/6:Orange, (-)500mA Ground when armed output, [Don’t know where to connect]
Aux/Shutdown/Trigger Harness, 24-pin connector
-H2/1:Pink/White, (-) 200mA Ignition/Flex relay control output [don’t know if I need this connection]
-H2/2:BLACK/ White, (-) Neutral safety input. [connected to chassis ground]
-H2/3:Blue/White, (-) 200mA 2nd status/rear defogger output [don’t know if I need this]
-H2/4:GREEN/ Black, (-) 200mA OEM Alarm disarm output. [don’t know where to connect or which wire]
-H2/5:RED / White, (-) 200mA Truck Release output. [not used, truck do not have trunks]
-H2/6:Green, (-) Door trigger input (n/c or n/o). [did not use, don’t know if I need this one]
-H2/7:BLACK / YELLOW, (-) 200mA Done light supervision output. [did not use, don’t know if I need this one]
-H2/8:BROWN / Black,(-)200mA Horn honk output. [Connected to (+) side of horn, did not work, need help]
-H2/9:Dark Blue, (-) 200mA status output. [don’t know where to connect]
-H2/10:Pink, (-) 200mAIgnition 1 output. [don’t know where to connect]
-H2/11:WHITE/ Black, (-) 200mA AUX 3 output. [Don’t know if I need this]
-H2/12:Violet, (+) door trigger input. [connected to BLACK/ blue wire in drivers kick panel, opens all doors]
-H2/13:WHITE/ Violet, (-) 200mA Aux 1 output. [don’t know if I need this]
-H2/14:Violet/Black, (-) 200mA Aux 2 output. [don’t know if I need this]
-H2/15:ORANGE / Black, (-) 200mA Aux 4 output. [don’t know if I need this]
-H2/16:Brown, (+) Brake Shutdown Input. [don’t know what this is or where to connect it]
-H2/17:Grey, (-) Hood pin input (n/c or n/o). [don’t know if I need this, or where to connect]
-H2/18:Violet / YELLOW, (-) 200mA Starter output. [don’t know where to connect this one]
-H2/19:Blue, (-)Truck pin/instant trigger input (n/c or n/o). [don’t know if I need, or where to connect]
-H2/20:Grey/Black, (-) Diesel Wait to start input. [I’m pretty sure I need this but don’t know where to connect]
-H2/21:WHITE/ Blue, (-) Remote start/turbo timer activation input. [don’t know if I need or where to connect]
-H2/22:Orange, (-) 200mA Accessory output. [Don’t know if I need, or where to connect]
-H2/23:Violet/White, tachometer input. [probably need this, don’t know where to connect]
-H2/24:GREEN / WHITE, (-) 200mA OEM alarm arm ouput. [don’t know where to connect]
Remote Start, 10-pin heavy gauge connector
-H3/1:Pink, (+) Ignition 1 input/output. [connected to RED / Green wire in ignition harness]
-H3/2:RED / White, (+) Fused (30A) ignition 2 / Flex relay input 87. [don’t know if I need this]
-H3/3:Orange, (+) Accessory Output. [connected to Blue/green wire in ignition harness]
-H3/4:Violet, (+) Starter output (car side of the starter kill). [Don’t know where to connect this]
-H3/5:Green, (+) Starter input (key side of the starter kill). [Don’t know where to connect this]
-H3/6:Red, (+) Fused (30A)ignition 1 input. [Don’t know where to connect this]
-H3/7:Pink/White, (+) Ignition 2/ Flex Relay output. [connected to RED / Black wire in ignition harness]
-H3/8:Pink/Black, (+) Flex relay input 87a key side (if required) of flex relay. [don’t know if I need this]
-H3/9:RED / Black, (+) Fused (30A) Accessory/Starter input. [don’t know if I need this]
-H3/10: not used