the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start a c 2007 murano


Post ReplyPost New Topic
< Prev Topic Next Topic >
sucks37123 
Member - Posts: 20
Member spacespace
Joined: November 28, 2012
Location: Colorado, United States
Posted: December 18, 2012 at 8:34 PM / IP Logged  

I have a 2007 Nissan Murano S with a viper 771xv viper remote start with the flashlogic flcan.

When ever I remote start the car it puts the air on the floor turns on the A C on and sets temp to 75. I cut the accessory wire thinking that would take care of the problem but it did not help.  By default the Murano defrost automatically turns on the A C. Any way to just make it use the setting i left it on?????

pomerlo 
Member - Posts: 9
Member spacespace
Joined: November 11, 2004
Location: Canada
Posted: December 19, 2012 at 2:46 PM / IP Logged  
First tought.... My 2007 Murano SL retain the settings between remote starts. The Murano has 2 accessory wire...
Search this forum.... it has the wire color for the second acessory. Feed it with the Viper 2nd acc or a relay if the viper doesn't have a 2nd accessory output.
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: December 19, 2012 at 2:48 PM / IP Logged  
Ready remote shows 2 accessory wires:
Accessory      red      +      ignition switch, white 6 pin plug, pin 4     
Second Accessory      WHITE/ blue      +      ignition switch, white 6 pin plug, pin 2
Connect the 2nd accessory as listed above and see if the problem persists. Did you also connect the 2nd starter?
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
uros 
Member - Posts: 17
Member spacespace
Joined: January 23, 2014
Location: Slovenia
Posted: January 23, 2014 at 3:40 AM / IP Logged  
Hi,
Can you tell me how did you install conecct flcan to alarm in yours Murano
I have Python and Flcan, to install.
Are there any tricks or something special i need to know?
Thank you
triniforever 
Copper - Posts: 323
Copper spacespace
Joined: November 12, 2008
Location: New York, United States
Posted: January 23, 2014 at 7:34 AM / IP Logged  
I believe when you are flashing the module there is an advanced setting where you can actually set the temperature control of the vehicle
triniforever

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer