viper 5902 2008 f350 diesel

Home / the12volt's Install Bay / Car Security and Convenience / viper 5902 2008 f350 diesel (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

kreg357

Platinum - Posts: 7,789

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 03, 2013 at 10:02 PM / IP Logged

These connections should be properly soldered and well insulated.

Are you following the PATS 2 / 3 programming?

Are you using the two Factory keys? ( can't use the same key twice, can't use a cloned key, etc )

Might try a module reset, then program it again. Can also try the Step 4 instead of a remote start.

All else fails, try swapping the RX / TX wire connections.

Soldering is fun!

clayton1985

Member - Posts: 22

Joined: January 05, 2013

Location: British Columbia, Canada

Posted: February 04, 2013 at 12:03 PM / IP Logged

kreg357 wrote:

These connections should be properly soldered and well insulated.

Are you following the PATS 2 / 3 programming?

Are you using the two Factory keys? ( can't use the same key twice, can't use a cloned key, etc )

Might try a module reset, then program it again. Can also try the Step 4 instead of a remote start.

All else fails, try swapping the RX / TX wire connections.

Connections are soldered and taped by me.

Yes following the Pats 2/3 programming.

Two keys, one original and the other was programmed by dealer (same one that was in the other bypass)

Ill try messing around again, hopefully get it figured out!

kreg357

Platinum - Posts: 7,789

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 04, 2013 at 2:25 PM / IP Logged

The timing part with each key and the security light can be critical.

Soldering is fun!

clayton1985

Member - Posts: 22

Joined: January 05, 2013

Location: British Columbia, Canada

Posted: February 08, 2013 at 2:14 PM / IP Logged

Got it! You were right about the timing of keys. Just tried it a few times then it worked. Thanks.

kreg357

Platinum - Posts: 7,789

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 08, 2013 at 3:06 PM / IP Logged

All right! viper 5902 2008 f350 diesel - Page 4 -- posted image. Just in time for the really cold stuff.

Soldering is fun!

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5902 2008 f350 diesel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.