10 mkx no heat on remote start

has anyone seen a no heater blower situation on a 2010 MKX. And yes I've checked all wiring IE: white orange for ign, and purple green for acc. symptoms are this car starts and everything lights up just no blower If I insert key and turn to ign and leave RS ON it still doesnt blow Once I hit brake the blower comes on Its the same in Takeover Once the RS takes over blower goes dead Not using a dball just an RFLOOP

Did you use a DMM to verify that the R/S is outputting +12V on the PURPLE / Green ACC wire?Soldering is fun!

never done an MKX before but if you know for sure that every wire you have hooked up is getting power when it should be i would start looking at any other wires you see at the ignition harness that isnt being powered by the remote starter, maybe there is a wire that is not mentioned by whatever tech sheet you are using. ive had this happen to me plenty of times.

If  the starter anti-grind cut off was placed in the accessory wire instead of the starter wire this would cause the   blower fan to  not power up until after the brake light is activated.