the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dei 530t, gwa relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
drewy1322 
Member - Posts: 23
Member spacespace
Joined: January 05, 2008
Location: Wisconsin, United States
Posted: January 25, 2013 at 2:46 PM / IP Logged  
I am going to be putting two DEI 530T modules in my vehicle. Currently I do not have anything hooked up to the GWA (orange) wire off my remote start. If I add two 530T modules, do I need to boost the (-)500ma output to a stronger ground using a relay?
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: January 25, 2013 at 3:26 PM / IP Logged  
You shouldn't need to since it is only driving relays. But to be safe, I would try to see what each 530T will draw and make sure it's not over 500mA
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: January 25, 2013 at 8:13 PM / IP Logged  
technically u shouldn't, boosting the gwa wire will leave a relay active with the car off, just diode and u should be fine.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer