vss connection for pioneer avic d1

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / vss connection for pioneer avic d1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rx7850

Member - Posts: 2

Joined: June 20, 2013

Location: Massachusetts, United States

Posted: June 20, 2013 at 3:57 PM / IP Logged

I will be installing a AVIC D1 in my 96 Volvo 850R. Could someone point me in the right direction for the VSS vehicle speed sensor connection. I have been told to use the Yellow / Black wire on the radio harness. To the best of my knowledge that is a accessory wire not a vss signal wire.

Input appreciated.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: June 20, 2013 at 9:04 PM / IP Logged

Directechs has no listing for it. Try using your DVM, you can set it for ohms or votlage, then move the car slowly. You should see a pulse every few feet.....

Mike M2

Tech Manager

CS Dealer Services

Back to Top

rx7850

Member - Posts: 2

Joined: June 20, 2013

Location: Massachusetts, United States

Posted: June 20, 2013 at 9:36 PM / IP Logged

Will do.

Thanks.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vss connection for pioneer avic d1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.