evo all not programming

Home / the12volt's Install Bay / Car Security and Convenience / evo all not programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: July 06, 2013 at 9:25 PM / IP Logged

I have a 2013 dodge dart soldered all connections for vehicle/evo/viper 5904. Ive installed over a dozen remote starts in the past never used an evo. All wires are tagged correctly. Going thru the Key Data Acquisition and CAN-Bus programming the unit will not exit from the solid yellow light after only inserting key into the ignition barrel without turning on. Any ideas? The directions are very specific. Holding the programming button, then inserting plug. Once lights turn yellow remove finger from programming button. Then install wires and press programming button 4x. once done flashing and solid yellow insert key. Doesnt change. Thank you for any assistance.

Raymond4646

Copper - Posts: 121

Joined: July 10, 2005

Posted: July 06, 2013 at 10:22 PM / IP Logged

Got the unit to work finally! Needed a software update that was recently released.

lucasoil4u

Copper - Posts: 317

Joined: May 11, 2009

Location: Minnesota, United States

Posted: July 10, 2013 at 10:17 AM / IP Logged

Glad to hear you got it figured out.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

evo all not programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.