viper 3105v on 95 accord

Hey guys was wondering if anybody here new what wires go to the door lock/unlock from the viper 3105v to my 95 Honda Accord LX? I tried wiring them but they wouldnt work. [IMG]uploads

H2/A___ Green (-) Lock, (+) Unlock Output   goes to BLACK/ WHITE (TYPE B) @ GRAY CONNECTOR ABOVE FUSEBOX in BLUE TAPE H2/B___ Empty Unless Using 451M H2/C___ Blue (-) Unlock, (+) Lock Output goes to ORANGE (TYPE B) @ GRAY CONNECTOR in FUSEBOX in BLUE TAPE I would place a 1N4004 diode with the band towards the Viper in each of the output wires above. H1/5 GREEN (-) Door Trigger Input, Zone 3 goes to BLACK/ WHITE (-) @ GRAY PLUG, RIGHT OF STEERING COLUMN H1/6 BLUE (-) instant trigger input goes to Orange Trunk Trigger (-) @ GRAY PLUG, RIGHT OF STEERING COLUMN If you plan on monitoring the hood with a Hood Pin, you can connect it to the H1/6 Blue wire also. Insert a 1N4004 diode with the band away from the Viper into each leg of this circuit.Soldering is fun!

Thank you I will try this.