the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 nissan murano


Post ReplyPost New Topic
< Prev Topic Next Topic >
ffyter 
Member - Posts: 48
Member spacespace
Joined: January 31, 2010
Location: Wisconsin, United States
Posted: November 23, 2013 at 9:59 AM / IP Logged  
Hello folks. I'm installing a viper 5701 with the dball interface in a 2006 murano with smartkey. Dball instructions say to connect relay for auto headlights to pin 33 at bcm and wire is GREEN/ YELLOW. Wire at pin 33 is light blue. Can anyone confirm this is the right one even though colors don't match? Also, I want to be able to use my factory remote on occasion for starting and was going to use the turbo activation with a double pulse on lock button. Anyone know if the ground on the lock wire is strong enough to do this because all diagrams don't list a lock motor wire which is obviously preferred to normal lock wire?
Nick
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 23, 2013 at 10:30 AM / IP Logged  
Use (+) park light wire instead RED / BLUE in driver's kick panel to rear of vehicle and trigger door pin wire ( LIGHT BLUE @ BCM above gas pedal ) with the re-arm output of the Viper to turn off headlights after shutdown and the RAP.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
ffyter 
Member - Posts: 48
Member spacespace
Joined: January 31, 2010
Location: Wisconsin, United States
Posted: November 23, 2013 at 10:37 AM / IP Logged  
Perfect thanks! Any idea on the factory remote question? Also what plug is the light blue wire in and how can I test to make sure I have the right one?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer