2001 lexus is300 viper 5704v

Home / the12volt's Install Bay / Car Security and Convenience / 2001 lexus is300 viper 5704v (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

ward1722

Member - Posts: 10

Joined: November 24, 2013

Location: North Carolina, United States

Posted: November 30, 2013 at 7:55 PM / IP Logged

I hooked it up that way but it tells me remote start error on the remote

yellow_cake

Copper - Posts: 178

Joined: December 01, 2011

Location: Saskatchewan, Canada

Posted: December 01, 2013 at 12:24 AM / IP Logged

What us the error you are getting, ie how many light flashes?

Btw, the neutral safety input wire has to connect to ground and the neutral safety switch has to be plugged in and in the on position.

ward1722

Member - Posts: 10

Joined: November 24, 2013

Location: North Carolina, United States

Posted: December 01, 2013 at 1:31 PM / IP Logged

Its 7 flashes (manual transmission mode is enabled and not initialized)

ward1722

Member - Posts: 10

Joined: November 24, 2013

Location: North Carolina, United States

Posted: December 01, 2013 at 1:50 PM / IP Logged

Do I need to hook up the 200ma ignition and starter wires on the 24 pin harness and if so where do I hook them too

yellow_cake

Copper - Posts: 178

Joined: December 01, 2011

Location: Saskatchewan, Canada

Posted: December 01, 2013 at 3:13 PM / IP Logged

The viper units come from the factory in manual transmission mode. You have to go into programming and change it to automatic mode.

The 200ma ignition wires are not needed for your car.

ward1722

Member - Posts: 10

Joined: November 24, 2013

Location: North Carolina, United States

Posted: December 01, 2013 at 4:15 PM / IP Logged

Do i use the control button on the antenna to program it

yellow_cake

Copper - Posts: 178

Joined: December 01, 2011

Location: Saskatchewan, Canada

Posted: December 01, 2013 at 4:48 PM / IP Logged

Yes, follow the instructions of the install guide.

ward1722

Member - Posts: 10

Joined: November 24, 2013

Location: North Carolina, United States

Posted: December 01, 2013 at 8:26 PM / IP Logged

Got it programmed works great and now I just have to put in the extra sensors I got

Thanks for the help and information

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 lexus is300 viper 5704v

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.