idatalink

I have ordered idatalink bypass module to go along with the viper 5704 for my 2011 camaro and before i dive in i had a couple of questions Im no pro (clearly) so any help is much appreciated Xmas broke me..lol What does the squiggly line going to the clutch pin 2 with the 180 over it (diagram top left angle) and i think i know but 2nd do i cut the immobilizer data wire to the car then connect wire to cut wire then other to pin 2 (diagram top right)again thanks

Thats the symbol for resistor so 180 ohm resistor on the (-) starter output to do clutch bypass. White red splice into GREEN/ red will face the vehicle and WHITE/ black will go to the other side. Not a real easy vehicle I've done a couple but there's not a lot of room to work and trying to solder in the vehicle can be a PITA. Make sure you double check your wires are away from any moving parts in and around the steering column.

ok thank you

Was wondering if you need to use wires from brain of alarm if you use the blade cartridge

The blade module only works on the Compustar remote starters. It will not work with any Viper systems.Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

No sorry forgot to include that i didn't keep the viper i went with compustar because of the positive reviews (cm6000)