13W7 Enclosure

Home / the12volt's Install Bay / Car Audio / 13W7 Enclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

midwayelec

Copper - Posts: 52

Joined: January 07, 2003

Location: United States

Posted: May 15, 2003 at 8:41 AM / IP Logged

My boss wants me to build a box for a 13W7, and he wants it amazingly loud tuned at about 30hz. I have lots of room to play with, basically he wants it to fit his escalade but be able to be put into other vehicles. We both realize it's not going to fit in most vehicles. He'll be running the Phoenix Gold Reactor to it, so it's plenty of power. Have any of you built a loud as hell box for this sub before? I have ideas on how I want to build it, but not sure on the dimensions yet, that's why I'm asking for opinions on here. I know it will be ported, I'll be using fiberglass resin on the inside, and two layers of quarter inch MDF for the front baffle. Any ideas would be greatly appreciated. Thanks.

Sean Cawby

Midway Electronics

Rensselaer, IN

219-866-3716

Back to Top

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: May 15, 2003 at 8:00 PM / IP Logged

My suggestion is that you take a look at the data sheet, I think it will answer most of your questions with the dimensions volume etc. http://www.jlaudio.com/subwoofers/pdfs/W7_DS.pdf

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

13W7 Enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.