viper 5901 with evo all explorer 2013

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 with evo all explorer 2013 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

drroeder

Member - Posts: 6

Joined: November 13, 2011

Posted: January 11, 2014 at 12:10 PM / IP Logged

Just a quick update. Got the original remote start to work with the evo-all. Had the wrong version of firmware loaded into the evo-all. But the current problem is that it will not disarm the factory alarm if the vehicle is locked. I have been on the phone with fortin tech support multiply times and have tried the the following firmwares, 71.11,71.10 and 71.05 Only 71.11 and 71.10 work.I was told that I do not need option 12 turned on Unlock before/lock after (Disarm OEM alarm) with did not work with firmware 71.11 (I tried it). I also tired the setting in the Viper option 2-7 Factory Alarm Disarm/with Unlock to Before Unlock but continue with the same results. Does any one have any suggestions.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 with evo all explorer 2013

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.