’02 accord factory disarm wire?

Home / the12volt's Install Bay / Car Security and Convenience / ’02 accord factory disarm wire? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Fitzgr8

Member - Posts: 41

Joined: September 24, 2003

Location: United States

Posted: January 04, 2014 at 3:59 PM / IP Logged

Wondering if someone could tell me where this wire is located? It says drivers power window switch but I can't seem to find it. A picture would be great!

Thanks

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: January 04, 2014 at 4:34 PM / IP Logged

If you have the LX model it disarms with the factory transmitter only,if its the EX model then the wire is Orange and is found @ the passenger door key unlock,also disarm no unlock is Blue found at the drivers key unlock on the EX model .

triniforever

Fitzgr8

Member - Posts: 41

Joined: September 24, 2003

Location: United States

Posted: January 05, 2014 at 11:46 AM / IP Logged

Sorry, forgot to mention that it is the EX with factory security. So, I have to pull the door panel eh?

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: January 05, 2014 at 11:55 AM / IP Logged

Yes sir

triniforever

Fitzgr8

Member - Posts: 41

Joined: September 24, 2003

Location: United States

Posted: January 06, 2014 at 3:05 PM / IP Logged

Ok, I think that I located the wire. Now my question is what wire gets hooked up from the remote start so that it doesn't set the factory alarm when remote started?

Thanks

chev104275

Gold - Posts: 1,424

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 06, 2014 at 3:43 PM / IP Logged

Should be a wire labeled factory alarm disarm

If i Can't Install it I Don't need it Joe

Fitzgr8

Member - Posts: 41

Joined: September 24, 2003

Location: United States

Posted: January 08, 2014 at 7:40 PM / IP Logged

When I lock the doors with the switch on the door and unlock with my auto page 915 remote the factory alarm goes off. I hooked up the pink factory disarm wire from the auto page brain to the blue wire inside the door. What am I missing?

Thanks

chev104275

Gold - Posts: 1,424

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 08, 2014 at 7:47 PM / IP Logged

Are you sure you have the correct wire. Did you test the disarm wire before hooking into it ?

If i Can't Install it I Don't need it Joe

Fitzgr8

Member - Posts: 41

Joined: September 24, 2003

Location: United States

Posted: January 08, 2014 at 8:03 PM / IP Logged

Pretty sure I have the right wire. It shows 12 volts and when you press unlock it goes to 0.

chev104275

Gold - Posts: 1,424

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 08, 2014 at 8:04 PM / IP Logged

Test the wire by turning the key in the drivers door. Black lead on suspect wire, red lead on 12v turning the key to unlock. The meter should read 12v when the key is turned to unlock.

If i Can't Install it I Don't need it Joe

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.