dball2 flashing key2go for remote start r

So I got a t-harness dball2 and xkloader2 so I can flash the dball2. My Nissan juke is remote start ready so I just need to get the dball flashed and installed. The problem I am having is that xpresskit.com the site you use to flash the dball2 won't let you flash key2go as you have to be a dealer. You can flash it normally right on the site but from my knowledge the only way I can use the rsr (remote start ready) is to use the key2go feature which is compatible with rsr cars. Most cars you can flash normally but it won't work. Anyone have any suggestions on if I can find someway to flash it myself or if I can get someone else to flash it for me? I'd rather not pay 100 dollars for it to be installed when I've already installed the harness and dball. I just need it flashed now. Is there anyway I can get temporary access on an account. I would pay a bit for that access I am close to finishing this project.

I forgot to mention this is a Nissan push to start 2013 juke sv. Not sure if that matters but figured it should be included.

you need to flash it threw the DEI flasher. you dont have to be a dealer but you do need the flasher cord. I cant remember if you need to be a dealer.

You can flash Xpresskit modules if you have the cable but you need a directechs login to do Key2Go. Your best option is to use a Idatalink/Flashlogic bypass as KLON (Key2GO) is available to everyone

Wonder why some of the best shops in the area are shutting down. Good luck with your stuff.