remote start trouble

Home / the12volt's Install Bay / Car Security and Convenience / remote start trouble (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

just_naton

Member - Posts: 10

Joined: January 11, 2014

Location: Kansas, United States

Posted: January 11, 2014 at 7:13 PM / IP Logged

Okay, thank you for all the help

smokeman1

Platinum - Posts: 1,589

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 12, 2014 at 9:14 AM / IP Logged

You could try to hit the brake pedal, assuming the brake wire is connected, to see if that cancels the remote starter from attempting to start.

Could be that the remote starter is still seeing a command to start and has not been canceled. Just a thought.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

just_naton

Member - Posts: 10

Joined: January 11, 2014

Location: Kansas, United States

Posted: January 12, 2014 at 11:07 AM / IP Logged

I tryed hitting the brake pedal, but it didnt stop it from trying to start, if you pull the fuses it does not try to start so i guess im gonna try to have them send me a different module

just_naton

Member - Posts: 10

Joined: January 11, 2014

Location: Kansas, United States

Posted: January 14, 2014 at 5:58 PM / IP Logged

So i got bored and checked the wires again and the only wires im questioning are the 4 wires in what they call the satellite harness, the instructions say

(-) 200mA accessory output

(-) 200mA starter output

(-) 200mA ignition output

Would these wires tie in to the appropriate main ignition wires or somthing else?

smokeman1

Platinum - Posts: 1,589

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 14, 2014 at 6:46 PM / IP Logged

We need you to list your wire connection for your 4103 and any bypass module installed so that we have a better idea of what might be happening.

4103 to Car...

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

just_naton

Member - Posts: 10

Joined: January 11, 2014

Location: Kansas, United States

Posted: January 14, 2014 at 6:55 PM / IP Logged

Well i think we found the problem, because i dont have a bypass module

just_naton

Member - Posts: 10

Joined: January 11, 2014

Location: Kansas, United States

Posted: January 14, 2014 at 7:08 PM / IP Logged

Nevermind, i unplugged the satellite harness and now it works

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start trouble

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.