key sensor

Home / the12volt's Install Bay / Car Security and Convenience / key sensor (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

maxamy

Member - Posts: 27

Joined: December 07, 2013

Location: West Virginia, United States

Posted: January 12, 2014 at 8:18 PM / IP Logged

I have a quick question... Is key sensor wire the same as ignition 2... reading all over the web and can't figure out what ignition 2 wire is on my vehicle... 2007 F150 ...

maxamy

Member - Posts: 27

Joined: December 07, 2013

Location: West Virginia, United States

Posted: January 12, 2014 at 8:20 PM / IP Logged

Its the black and pink one in question...

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: January 12, 2014 at 8:26 PM / IP Logged

2004 and newer F150 don't have an ignition 2 ...so you won't find one.

The key sense lets the vehicle know a key is inserted into the key cylinder (ignition switch).

Mark

maxamy

Member - Posts: 27

Joined: December 07, 2013

Location: West Virginia, United States

Posted: January 12, 2014 at 8:30 PM / IP Logged

so does that mean you just don't connect it? I have everything else connected and it didn't do anything when I hit the remote... not sure what else to do..I figured it was doing nothing since ign 2 wasn't connected...

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: January 12, 2014 at 8:32 PM / IP Logged

Correct, it can be left open/disconnected.

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: January 12, 2014 at 8:55 PM / IP Logged

There is no response when the remotes are used?

maxamy

Member - Posts: 27

Joined: December 07, 2013

Location: West Virginia, United States

Posted: January 13, 2014 at 5:02 AM / IP Logged

When I program the remote I get a click from the remote starter unit... No response from the truck... I feel pretty sure it's connected right... I really took my time sand paid attention to detail... I'm wondering about that key sensor wire on the ignition harness...does it need to be connected?

I've connected...

12V to Battery

I ran another 14Ga to the Battery

Acc

Starter

Ignition to Ignition1 on remote starter

Hood pin

Brake Pedal

Ground

USing a Audiovox AS-9055

2007 Ford F150...

maxamy

Member - Posts: 27

Joined: December 07, 2013

Location: West Virginia, United States

Posted: January 13, 2014 at 5:07 AM / IP Logged

maxamy

Member - Posts: 27

Joined: December 07, 2013

Location: West Virginia, United States

Posted: January 13, 2014 at 5:09 AM / IP Logged

I've not messed with PATS yet, just trying to get the remote starter to work with the key in then I'll start working on that... All I'mm looking for is a response from the starter when I click the remote ... as of now I'm not getting that...

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 13, 2014 at 6:30 AM / IP Logged

What make/model of remote start ?

If i Can't Install it I Don't need it Joe

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.