2010 mercury mariner, avital 5303

Home / the12volt's Install Bay / Car Security and Convenience / 2010 mercury mariner, avital 5303 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

chev104275

Gold - Posts: 1,424

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 10, 2014 at 5:37 PM / IP Logged

Would the wire were testing be the same wire you had hooked to the unlock motor wire previously ?

If i Can't Install it I Don't need it Joe

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: March 10, 2014 at 5:39 PM / IP Logged

Yes it is. Is the diode not working in that I still get near 12v on it?

chev104275

Gold - Posts: 1,424

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 10, 2014 at 5:43 PM / IP Logged

I would venture a guess that you burnt the output to that unlock wire when you connected it to the motor wire. I would see if you can get another brain

The diode it there to block the positive pulse from the system. So with a new brain you would still Need it

If i Can't Install it I Don't need it Joe

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: March 10, 2014 at 5:54 PM / IP Logged

OK I was beginning to think that was the case. I am able to get another box. I will post the outcome once I receive it and connect. Thanks for all of your help.

chev104275

Gold - Posts: 1,424

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 10, 2014 at 5:58 PM / IP Logged

Your welcome good luck. You verified your relay is connected correctly by ground the pin and it worked. I would put a diode on the lock wire as well

If i Can't Install it I Don't need it Joe

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: March 11, 2014 at 2:26 AM / IP Logged

One other thing while I wait on the new box. The headlights also come on with remote start. Is there anyway to only have parking lights? I have the drl always off and the headlights still manage to come on.

chev104275

Gold - Posts: 1,424

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 11, 2014 at 6:08 AM / IP Logged

What wire are you using for parking lights ?

If i Can't Install it I Don't need it Joe

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: March 11, 2014 at 11:33 AM / IP Logged

Ah I think I may have found it. I grabbed it at the blue/gray -. If I grab it at the PURPLE / White positive, will that take care of it?

chev104275

Gold - Posts: 1,424

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 11, 2014 at 11:44 AM / IP Logged

As far as I can remember it should. Haven't done an escape on a while. I use positive lights on all fords anyway. Don't forget to change the jumper in the remote start unit

If i Can't Install it I Don't need it Joe

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: March 11, 2014 at 12:49 PM / IP Logged

OK sounds good. Thanks

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.