directed 4103 remote start

Yeah. I always over think things. I was thinking the unit was an interupt. It is more like a piggy back. Thank you for putting me back on track. The last one of these I did was about 10 years ago. I did on on a 95 integer and a 2000 grand am. Just used the door triggers to activate the remote start so the OEM remotes could be used. Bbut the polarity is different on this car.   I will try reversing the polarity with a relay. Thank you again.

make sure the hood isnt open... LOLyuk

quiet rural missouri, near KC.

If your system moves you physically and not emotionally, you have wasted your money.

Let me start by saying, "I hate the BCM in this car". I like to Use the OEM key fob to keep things neat and clean. Using the horn ground signal (don't ask) and three pulses the car started perfectly. I found out the hard way that once the car is started the BCM shuts down all usage of the OEM key fob. "In my day, Cars didn't think for you" -Grumpy Old Man So I went in and wired the remote start to use the aftermarket Key fob. Using the wiring in the drivers side kick and hazard relay control at the BCM. All works fine now. Thank you for the help and the wiring diagrams were invaluable. I bought a FSM for this car. If anyone needs print outs, let me know.

Pregunta, Maybe you can help answer a question I posted yesterday. I just installed the 4103 in a 2001 Dodge Ram. I have found if I leave the doors unlocked (and closed), then start the truck remotely the doors do not lock. The lock/unlock on the remote works fine otherwise. Just wondering if the unit is supposed to lock the doors on remote start. I know my 5901 does in my other car. Thanks

I don't think they do. But you could use another output to trigger them. I will check the manual tonight when I get home.   

I usually use the negative start output (purple in the small 4 wire harness) use a diode to prevent feedback.If i Can't Install it    I Don't need it   Joe

chev104275 wrote: I usually use the negative start output (purple in the small 4 wire harness) use a diode to prevent feedback.

Could he split/diode and use the light GREEN/ black factory disarm also? I pulses negative once the remote start is activated. The install guide I found doesn't cover the satellite harness.

He would have to check you believe you can set the disarm wire to pulse on remote start only. So yes that could be an option. But If his truck has a factory alarm then you would also need it to pulse on the unlock command which wouldn't be what you want.If i Can't Install it    I Don't need it   Joe