the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

add siren to clifford matrix1.3x rs brain


Post ReplyPost New Topic
< Prev Topic Next Topic >
dcman41 
Copper - Posts: 211
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 21, 2005
Location: United States
Posted: April 11, 2014 at 10:09 AM / IP Logged  
Hello, ill be installing this into a friends car, and they have a siren they want me to add to it as well. so that it will go off when the system is armed, the doors are opened and fas a confirmation honk if possible. Is this possible to achieve? I dont see any outputs on the remote start brain that can do it. Can i maybe use a relay to convert the - horn output on the brain to a positve, then use that as a siren output?or the ground while armed output? Or would it be best just to purchase the DEI 516L module? If not, what would be the best way to achieve this? Thanks
-Rob
howie (aka: harryharris)
Silver - Posts: 355
Silver spacespace
Joined: February 17, 2014
Location: Florida, United States
Posted: April 11, 2014 at 4:08 PM / IP Logged  
Does that unit have a brown low current NEG output?
Then a mini relay to a siren.
Test before boxing up.
blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: April 11, 2014 at 11:29 PM / IP Logged  
Connecting the siren as stated above will only give chirps when locking, unlocking and panic.
dcman41 
Copper - Posts: 211
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 21, 2005
Location: United States
Posted: April 12, 2014 at 6:00 PM / IP Logged  
is there anyway to add door/trunk/hood monitoring to that remote start ? or anyway to add security like features to it?
blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: April 15, 2014 at 10:46 PM / IP Logged  
Not as it is. the only way to do it woud be remove it and replace it with an alarm/starter combo or you can add an alarm system that has an extra AUX output and connect it to the WHITE/ blue activation input.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer