the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

compustar cm6000 2 way remote beep


Post ReplyPost New Topic
< Prev Topic Next Topic >
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
Posted: April 16, 2014 at 3:27 PM / IP Logged  
Hello all I am in the process of finishing the install on my RSX with a CM6000-AS and 2 way remote SS kit. I am having one issue which is when I arm the system I get 3 chirps from the siren and horn and the remote beeps a bunch of times and the lights on the remote flash. I have taken this video so as to make it as clear as possible...
I have disconnected the hood and trunk wires at the control module of the cm6000 and when i arm the car i get this
compustar cm6000 2 way remote beep -- posted image.
Everything is closed...
Also when I connect the op500 it reads err 1 fail
can someone help me please.
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
Posted: April 17, 2014 at 10:16 AM / IP Logged  
Please can anyone help me on this? I need to get this done ASAP
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: April 17, 2014 at 3:39 PM / IP Logged  
op500 will fail when the system is armed. disarm and then plug in. Plus i don't see the video. its not showing
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
Posted: April 17, 2014 at 3:41 PM / IP Logged  
I have the system disarmed and have tried to use the op500 with no luck
ok here is the link for the video
compustar cm6000 2 way remote beep -- posted image.
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
Posted: April 17, 2014 at 3:58 PM / IP Logged  
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: April 17, 2014 at 10:39 PM / IP Logged  
I have never seen that issue. Reprogram the remote and or reflash the brain on the idatalink website.
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
Posted: April 17, 2014 at 10:48 PM / IP Logged  
Ok I will try that in the morning.... I think it might have to do with the door pin switches and the door triggers when I was closing up the car and leaving the garage I closed it all up and it did it again I disarmed it and opened the pass door then armed it and the system chirped 3 times but it didn't show the doors open on the remote....
kreg357 
Platinum - Posts: 7,529
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: New York, United States
Posted: April 17, 2014 at 11:21 PM / IP Logged  
I believe the problem is that the Compustar is seeing the Hood Pin input signal at Chassis Ground when you press the Lock button.
While we are not comparing apples to apples, I get similar results on a FT6200-s install I did today if I raise the hood and hit the
Lock button. The first Lock press will flash the Parking Lights three times ( instead of once). The second Lock press will flash the
Parking Lights three times and beep the horn three times ( instead of once). Triple check the Compustar to ensure that the Hood Pin
input wire is not connected to chassis ground.
Soldering is fun!
jdmegcoupe 
Copper - Posts: 77
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 15, 2003
Location: Massachusetts, United States
Posted: April 22, 2014 at 3:50 PM / IP Logged  
Okay I have been sick for the last 4 days.... Today i went out to the car and i tapped the drivers door pin switch with a wire and did the same to the pass side, then i put 2 diodes tied both of the anode sides together and connected that to the CN3 Pin 10 RED / white cable at the control module, then the wire from the pass side door to one of the cathode sides of one of the diodes and the drivers side to the other diode, I closed the hood and closed the doors and its still beeping 3 times when I arm and lock
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, December 3, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer