2001 suburban and viper 5101

Home / the12volt's Install Bay / Car Security and Convenience / 2001 suburban and viper 5101 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

kw4tx

Member - Posts: 48

Joined: July 26, 2009

Location: Alabama, United States

Posted: November 09, 2014 at 5:13 PM / IP Logged

Awesome. ..I will have to try that when I get a chance...done ran out of time and off days :)

Back to Top

kw4tx

Member - Posts: 48

Joined: July 26, 2009

Location: Alabama, United States

Posted: November 10, 2014 at 3:04 PM / IP Logged

Thanks worked like a charm... :)

Back to Top

kw4tx

Member - Posts: 48

Joined: July 26, 2009

Location: Alabama, United States

Posted: November 12, 2014 at 12:48 AM / IP Logged

Alright... I have a question or an issue?

I remote start my truck and let it run... but when I shut it off the radio does not turn off until I unlock and relock the doors...

I though it would shut off when I turned off remote start too....

When I first hooked the wire to the the tan B4 on purple plug I thought it worked...

Back to Top

kw4tx

Member - Posts: 48

Joined: July 26, 2009

Location: Alabama, United States

Posted: November 12, 2014 at 1:04 AM / IP Logged

Sorry this is what I did

GREEN / WHITE (-) 200mA FACTORY ALARM REARM wire to this wire :

Driver Door Trigger Tan (-) @ BCM, Purple plug, Pin B4

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 12, 2014 at 5:37 AM / IP Logged

Probably should test the Viper to ensure it is outputting the Rearm signal after a manual remote start shutdown. Also, test / verify that Tan wire is the driver's door pin.

Test that the radio shuts off after a manual remote start shutdown by quickly opening the drivers door and closing it. Then you could manually try applying a chassis ground via a jumper cable to the Tan wire after a manual remote start shutdown to see if it turns off the radio.

Soldering is fun!

Back to Top

davep.

Gold - Posts: 641

Joined: May 27, 2011

Location: California, United States

Posted: November 12, 2014 at 10:25 AM / IP Logged

I've used the grn/wht FAR to deactivate RAP the way Kreg describes. It works on a manual RS shutdown as well as a time-out shutdown.

Another option is to just let the RAP timeout and shut off on its own. Which it should after 10 minutes or so.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 suburban and viper 5101

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.