the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5 wire trunk pop


Post ReplyPost New Topic
< Prev Topic Next Topic >
mobile_chick 
Copper - Posts: 61
Copper spacespace
Joined: September 03, 2002
Location: United States
Posted: May 20, 2003 at 12:39 PM / IP Logged  
how do i wire a 5 wire trunk pop. can someone explain this to me?
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: May 20, 2003 at 3:37 PM / IP Logged  
what yr make and model of car????
is this a factory trunk pop??
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
mobile_chick 
Copper - Posts: 61
Copper spacespace
Joined: September 03, 2002
Location: United States
Posted: May 21, 2003 at 9:41 AM / IP Logged  
it is a factyory trunk pop in a 2003 toyota camry.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: May 21, 2003 at 3:53 PM / IP Logged  
my notes dont say anything about being a 5 wire trunk release system....
are you talking about the drivers door lock motor?????
the trunk releasae should be a positive system..
Trunk Release WHITE/ BLUE (+) AT 12 PIN WHT CONN DR KICK
double check the wire with a meter...
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: May 21, 2003 at 7:58 PM / IP Logged  
Yes, trunk release is 5-wire on that car. The WHITE/ blue wire rests at ground from the integration relay, and if you apply positive power directly to it, you'll simply blow fuses.
The goal here is to apply power to the motor so that the trunk will open....but not to send power to the integration relay....this isn't hard; there's just a little more work wiring up your relay.
First, you cut the WHITE/ blue wire in half. The side of the wire that goes toward the trunk goes to the release motor...and if you power it up, the trunk will open. The other side is going to the integration relay.
So, you'll wire up your relay like this:
85 and 87: fused 12 volts.
85: trunk-release output from your alarm.
87a: integration relay side of the WHITE/ blue wire.
30: trunk motor side of the WHITE/ blue wire.
So, when everything is at rest, 87a and 30 are connected...meaning your car is sitting just like it came from the factory.
When you push the button on your remote, the relay of course turns on. Now, the relay breaks the WHITE/ blue wire in half, but it also sends power to the trunk motor...because 87 and 30 are now connected together, and then the trunk opens.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: May 22, 2003 at 6:42 AM / IP Logged  
i think Chris means this:
86 and 87 12 volts
85 wire from alarm (neg output)
30 to motor
87a to car side of trunk release wire.
i think it was a typo when he said
85 87 12 volts
and then 85 output from alarm
most alarms use a neg. output for the trunk release.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: May 22, 2003 at 7:04 PM / IP Logged  
Hey, good call. I guess I wasn't paying attention. Yes, 86 and 87 should get power; 85 should get the negative trunk release output from the alarm.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer