no start w key only with remote starter

Home / the12volt's Install Bay / Car Security and Convenience / no start w key only with remote starter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

yachtman

Member - Posts: 6

Joined: November 08, 2014

Posted: November 15, 2014 at 8:00 AM / IP Logged

2006 Subaru tribeca

Installed a bulldog RS83B

Starts great with the remote start

Now it will not start with just the key.

I'm really stumped??

Snowing in Spirit Lake

Back to Top

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: November 15, 2014 at 8:18 AM / IP Logged

Checked for blown fuse possibly

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 15, 2014 at 9:11 AM / IP Logged

You could try unplugging the Red 2 Pin transponder loop from the RS82B brain and try to start with the key. If it works like this, it would mean that the Bulldog was always outputting the transponder signal to the antenna and the car was seeing two keys at the same time and not happy.

Soldering is fun!

Back to Top

yachtman

Member - Posts: 6

Joined: November 08, 2014

Posted: November 15, 2014 at 10:10 AM / IP Logged

I'll give that a try.

I currently get a fast crank and no start. I had this exact issue when I first installed the remote. Bulldog sent ma a transponder loop that goes around the ignition. Installed it and remote works perfectly.

But now the key doesn't work. Unfortunately I have her all buttoned up.

Practice makes perfect. no start w key only with remote starter -- posted image.

Back to Top

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: November 15, 2014 at 5:03 PM / IP Logged

Bypass is on constantly.

Seeing 2 keys.

Recheck the bypass

Back to Top

yachtman

Member - Posts: 6

Joined: November 08, 2014

Posted: November 17, 2014 at 7:55 AM / IP Logged

With the no start condition.

How do I check the bypass??? no start w key only with remote starter -- posted image.

Back to Top

chev104275

Gold - Posts: 1,427

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: November 17, 2014 at 8:22 AM / IP Logged

Do like kreg all ready suggested remove they loop on the bypass and try using the key. If the key works then it's you're bypass causing the issue. How do you have your bypass wired up ?

If i Can't Install it I Don't need it Joe

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no start w key only with remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.