the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start, 02 honda accord


Post ReplyPost New Topic
< Prev Topic Next Topic >
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 04, 2015 at 6:01 PM / IP Logged  
no relays. ground while running, connect that to the ungo status output wire.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
bowser91 
Member - Posts: 21
Member spacespace
Joined: January 16, 2013
Posted: January 04, 2015 at 7:24 PM / IP Logged  
tedmond wrote:
no relays. ground while running, connect that to the ungo status output wire.
So the while running/status output get grounded?
bowser91 
Member - Posts: 21
Member spacespace
Joined: January 16, 2013
Posted: January 04, 2015 at 7:57 PM / IP Logged  
remote start, 02 honda accord - Page 2 -- posted image.
I'm pretty sure the ungo is going to get scrapped for an avital 4103lx. This will be my first install I just have some questions about a few wires. I want piece of mind in knowing it was done right.
Are the following wires even used in my application.
Main harness.
H1/2
H1/3
H1/5
4pin
2,3,4 guessing no?
Remote harness
H2/5 BLUE/WHITE (-) 200mA 2ND STATUS/REAR DEFOGGER Output?
bowser91 
Member - Posts: 21
Member spacespace
Joined: January 16, 2013
Posted: January 04, 2015 at 8:12 PM / IP Logged  
remote start, 02 honda accord - Page 2 -- posted image.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 04, 2015 at 8:15 PM / IP Logged  
blue status output to pkall ground when running
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
bowser91 
Member - Posts: 21
Member spacespace
Joined: January 16, 2013
Posted: January 05, 2015 at 3:00 PM / IP Logged  
Anyone on the wires?
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer