viper 5906v in wrangler

Im installing a Viper 5906v in my jeep wrangler unlimited. It did not come with factory door locks so i installed my own last year using a Viper211. That is working fine. Im also using the progressive unlock with an extra relay. Now I would like to move up to the Viper 5906v for a remote start. I have the Idatalink ALCA module flashed CH5_EN for D2D with the viper. Im also going to use the T Harness ADS-HRN CH5. 2 questions for the Viper guru's. Will my alarm just talk to the ALCA D2D out of the box or is this something i need to enable? Also will I need to remove the Viper 211 and hard wire the locks to my new Viper. I see the door lock relays in the new Alarm Door lock 3 pin Harness. Its 500MA which should be plenty to pop my actuators but im not sure about the Progressive unlock. I see Pink/White is a Flex output. Hopefully someone knows this system and can advise me.Tony

remove viper 211. the 5906 will communicate with the alca if it was correctly flashed, ready to go out of the box. pink/white is not required.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Thanks. Will the Progressive unlock work. what wire is the second unlock? TkTony

tkostansek wrote: Will the Progressive unlock work. what wire is the second unlock?

Yes progressive unlocking will work. Any of the (4) Aux outputs can be programed for 2nd unlock. Menu 2, Linking = None. Type = Option 6.