the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring speakers and subs to amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
and1515 
Member - Posts: 1
Member spacespace
Joined: January 18, 2015
Location: California, United States
Posted: January 18, 2015 at 4:36 PM / IP Logged  
Hi, okay so I recently purchased a new head unit Sony 575up and installed it on the back it has two sets of rca jacks. So I have 4 kenwood speakers in my car on all doors and two subs wired together in the trunk. I have two kenwood amps I have a 1800 watt mono block and a 2/3/4 channel KAC-2404s amp for the speakers. Now here is the problem everything sounds fine the subs work and so do the speaker but when I try to wire the speakers to the amp only the top channels work I can't use the bottoms two channels I tried splitters but that didn't work idk what to do at this point. Right now I habe 3 speakers bridged to one channel and the other on the other channel. And now if I turn the deck up past 22 the amp shuts off so please help I can't figure it out.
and1515
sirhutson 
Member - Posts: 30
Member spacespace
Joined: January 29, 2015
Location: Texas, United States
Posted: February 02, 2015 at 3:44 PM / IP Logged  
so you have just front and rear/sw on your head unit? how do you have your RCA's running to your amplifiers?
Hutson-

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, June 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer